Using The Heater - MALTEC CH7000DWW WiFi Instruction Manual

3. Hold the side of the product, look at the position of the wall hole of the rear cover,
and slide the wall to the top of the slot, that is, the installation of the wall is
completed, as depicted in the picture below.
Note: Prior to the drilling, make sure there is no cable or other pipelines on the wall to
avoid damage. Remember that the screws on the wall shall be fixed and firm to ensure the
safety installation of the electric heater on the wall. Please note the safe distance
mentioned below.
 During installation, the heater must be maintained sufficiently safe distance from
combustible materials and gas and away from water.
 During wall-hanging installation, keep the installation height from the ground greater
than 15 cm. Hanging-type heater shall be no less than 50 cm away from the ceiling.

Using the Heater

Display Screen
19/43