Wall Mounting Your Soundbar - Bush SR215Y Instruction Manual

Using your Soundbar
Let's get started
Note: Remember to unplug the USB stick after use to access the other modes on your
Soundbar.

Wall mounting your Soundbar

You can wall mount your Soundbar. You will need:
• 2 x rawl plugs of a type and size that are suitable for the wall that you will hang the
Soundbar on. 2 rawl plugs have been supplied but please check that these are suitable
for the wall surface that you will use.
• 2 x screws that are the correct size for the rawl plugs. 2 screws have been supplied
which are the correct size for the rawl plugs provided, but you will need to check that
they will be sufficient for the wall surface that you will use.
You will also need to check that the screw heads fit and hold well into the wall mount
points on the back of the Soundbar.
Notes:
Make sure that the screws and rawl plugs you use are suitable for supporting the
Soundbar.
To avoid damage to the Soundbar and personal injury, you should get a qualified person
to drill the fixing surface and fit the appropriate wall fixings.
When drilling into walls, always check that there are no hidden wires or pipes etc.
Before wall mounting your product, check the wall strength. If this is not clear, then
consult relevant qualified personnel.
Take care not to allow the Soundbar to fall whilst attempting to hook it onto the screws
you have fitted to hang the product onto.
24
Using your Soundbar