Table of Contents
Advertisement
Using your Soundbar
Let's get started
Wall mounting your Soundbar
You can wall mount your Soundbar. You will need:
•
the 2 wall mount brackets included with your soundbar
•
2 x rawl plugs of a type and size that are suitable for the wall
that you will hang the Soundbar on. 2 rawl plugs have been
supplied but please check that these are suitable for the wall
surface that you will use.
•
2 x screws that are the correct size for the rawl plugs. 2 screws
have been supplied which are the correct size for the rawl
plugs provided, but you will need to check that they will be
sufficient for the wall surface that you will use.
You will also need to check that the screw heads fit and hold well into the wall mount
points on the back of the Soundbar.
Notes:
•
Make sure that the screws and rawl plugs you use are suitable for supporting the
Soundbar.
•
To avoid damage to the Soundbar and personal injury, you should get a qualified
person to drill the fixing surface and fit the appropriate wall fixings.
•
When drilling into walls, always check that there are no hidden wires or pipes etc.
•
Before wall mounting your product, check the wall strength. If this is not clear, then
consult relevant qualified personnel.
•
Take care not to allow the Soundbar to fall whilst attempting to hook it onto the
screws you have fitted to hang the product onto.
section of these instructions, or online at www.bush-support.com. If you still require further assistance, call one of our experts on 0345 600 3021.
Using your Soundbar
25
Advertisement
Table of Contents
