Adjusting The Volume; Pairing With A Bluetooth Device - Bush SR215Y Instruction Manual

Using your Soundbar
Let's get started

Adjusting the volume

Vol- on the soundbar and the remote
• Press and release to decrease the volume in steps.
• Press and hold to progressively decrease the volume.
Vol+ on the soundbar and the remote
• Press and release to increase the volume in steps.
• Press and hold to progressively increase the volume.

Pairing with a Bluetooth device

Before you can use your Sound bar in Bluetooth mode with your TV or other Bluetooth
capable device, you need to 'pair' it.
1. When you first power on your Soundbar or when you change the mode to Bluetooth,
the product will search for Bluetooth devices and you will see a blue LED flashing on
the front of the Soundbar.
2. On the device that you would like to connect to your Soundbar via Bluetooth (e.g. TV/
iPhone/iPad/Android/other phone/Tablet/Computer), turn on Bluetooth connectivity
and ensure that it is 'discoverable' .
Note: If necessary, refer to the instructions for your device to add or set up Bluetooth.
3. When found, your Soundbar will be displayed as 'BUSH SR215Y' . Select the device
name to begin pairing.
Note: If your device requests a password, please enter '0000' to complete the device
pairing.
4. Check the Soundbar, the blue LED will stop flashing and will remain on when pairing
has been successful.
section of these instructions, or online at www.bush-support.com. If you still require further assistance, call one of our experts on 0345 600 3021.
Using your Soundbar
21