Advertisement
Video
resolution
The length of
the video
Operate
interval
Date/Time
Time Stamp
Timer
Password Set
Serial ID Set
Record Audio
Format
Economy mode
DC6V-2A port
Default setting
Version
1080FHD
1920x1080
720P
1280 x720
WVGA
800 x 480
VGA
640 x 480
10 seconds - 3
minutes
5 seconds - 30
minutes
Enter
Off
On
Off
On
Off
On
Off
On
Off
On
Cancel
OK
Off
On
/
Cancel
OK
Enter
Selects video resolution (pixels
1920x1080 per frame). Higher
resolution 1280x720 will provide
better video quality, but the files
created will occupy more space.
AVI format video can be played back on most
video players.
Select the shortest time interval for the camera
to wait and the PIR sensor will be triggered as
soon as prey appears. At selected intervals, the
camera will not capture pictures or video, which
prevents the SD card from storing too many
redundant pictures.
Select the date/time and press ENTER to set
the date.
If you want to have a date/time watermark on
each image, you can select a time watermark.
Select "Off" and there will be no watermark on
the picture.
If you want the camera to operate only certain
hours of the day, you can choose "on"
Set a password to protect the camera from
unauthorized users
Select "On" to assign a serial number to your
camera. You can use 4-digit combinations to
record pictures from a location.
The default setting is on, when on, the camera
can record, otherwise, only silent video
When formatting an SD card, all files will be
deleted. If your SD card has been used on other
devices, formatting is strongly recommended.
With economy mode on, the IR Brightness will
be reduced to save power.
The solar panel power supply port (DC 6V-2A).
The wildlife camera does not support direct
charging from an adapter, but it can charge the
battery, replace the dry battery, or utilize a solar
panel to obtain power supply.
Restore the factory settings.
View camera version.
Advertisement
