Advertisement
OPERATION
Batteries
1.
Remove the battery compartment cover.
2.
Install 8 AA batteries paying close attention to the orientation of the polarity
symbols (+/-).
3.
Replace the battery compartment cover.
Note: Do not mix different kinds of batteries (e.g., alkaline, lithium, rechargeable).
Never combine old and new batteries.
• When the batteries are running low, "Battery Low" will be shown on the display.
• If the camera is not to be used for an extended period, remove the batteries to avoid
possible leakage damage.
• In addition, the camera can be powered using an external DC 5V/2A solar powered
power supply (not supplied).
Inserting a microSD Card
To use the camera effectively, it is essential to install a microSD card since the camera
lacks built-in memory. The microSD card should have a capacity of up to 32GB and a class
10 rating.
Prior to insertion into the microSD card slot, verify that the card's capacity does not exceed
the recommended limit and that it has been tested for compatibility. This ensures smooth
operation and enables the camera will store captured data efficiently.
Setting the Camera
Slide the mode switch from OFF to TEST position to activate the camera and view the user
setup screen.
In TEST mode, the camera will operate similarly to a normal digital camera. You can
capture a picture or video and enter the menu to set parameters.
Advertisement
