Advertisement
USB
With the camera switched off or while in test mode, you can connect the camera to your
computer to manage the saved photo/videos (USB cable not supplied).
The pictures and videos of the camera are stored in the folder \DCIM\100MEDIA in the SD
card. The file names for images will be "imag000X1.jpg" and videos will be "imag000X.avi".
The SD cards can be placed in card readers and inserted into the computer to browse the
files in the USB disk.
Auto Recording Mode
In this mode and the camera will start when prey or other objects enter the PIR sensing
area, both PIRS are triggered at the same time and immediately start taking photos or
recording videos.
• The PIR in the middle mainly detects the left and right viewing angles and the viewing
angle distance is 45º, within 10 meters.
• The Angle of view of the PIR below is 90º and the distance is within 15 meters.
• If the prey strolls away from the PIR sensor, the camera will be powered off and put into
standby mode.
Positioning the Camera
• It is recommended that you position the camera 1 - 2 metres above the ground.
• For best results, face the camera north or south and remove branches near the front of
the camera.
Note: To avoid potential false triggers, do not point the camera at a heat source (e.g., the
sun) or near a branch trunk.
Settings
Mode Setting
Languages
Photo pixel
Capture
Video
Capture+
Video
Enter
24MP
16MP
12MP
8MP
5MP
2MP
1.3MP
Choose to take a picture or video. In
Capture+Video mode, the camera will first
capture picture and then record video.
11 (Optional)
Select the required image resolution (1.3MP ~24
MP). Higher resolution will have better quality
but occupy more space. It will take a long time
to write larger files into SD card, which will
slightly reduce the shutter speed.
Advertisement
