Description Of The Modes - Hohem iSteady M6 User Manual

Description of the Modes

Multifunctional control wheel
Press twice to focus (only available through the Hohem
Joy app) or adjust the angle (+/- 45°).
Press three times to switch between CCT (adjust colour
temperature and brightness of cold/warm light) and
RGB (control colour and brightness of the RGB light).
Press and hold to turn on/off CCT fill light or RGB light
(among the four modes above, on/off occurs only in
CCT/RGB mode).
Press once to select an option (only available in
CCT/RGB mode).
Buttons for A-B motion
For timelapse shooting, long press A/B button to set the
start/end point to record the A-B motion timelapse.
Long press A/B button to set A/B as start/end point. A
short beep signifies successful setting.
Press A/B button once to quickly return to the A point
or B point.
Press A/B button twice to return to the A point or B
point from the current point at a constant speed. You
will hear a short beep as the movement begins and
ends. Default duration is one minute, but this can be
changed in the Hohem Joy app.
Pan follow (PF)
Tilt and roll axes are both locked, and camera is
able to move to left or right smoothly.
Pan and tilt follow (PTF)
Roll axis is locked, and camera is able to move
left/right, and tilt up/down.
12