Sony CLIE PEG-UX50 Operating Instructions Manual page 40

01US01COV.book Page 39 Friday, June 20, 2003 6:29 AM
A SSID
Enter the value setting for 1 SSID on the check sheet.
Note
Alphabet input is case sensitive.
B WEP Key
Enter the value setting for 2 WEP Key on the check sheet.
C Adhoc mode
You can communicate with other wireless LAN compatible devices without
connecting to the wireless LAN access point when [Adhoc mode] is selected.
D Power Save
You can enable the power saving function when [Power Save] is selected.
Note
You cannot select [Power Save], when [Adhoc mode] is selected.
Tip
You can disable the power saving function for the maximum battery power when the
communication reception of the wireless LAN is low. However, the battery power
is quickly consumed.
Select [Power Save] for normal use.
E IP address
Tap next to [IP address] to disable [DHCP], and you can enter the value
settings for 3 Primary DNS, 4 Secondary DNS, 5 IP Address, 6 Netmask,
and 7 Router in the following IP Address screen.
F Auto Connect
When [Auto Connect] is selected, your CLIÉ handheld automatically connects to
the wireless LAN access point when you access it.
6
Tap [OK].
The Wireless LAN Setup screen is displayed.
7
Tap [OK].
The Preferences screen is displayed.
Sony Personal Entertainment Organizer PEG-UX50/UX00 X-XXX-XXX-11 (1)
39