Step 1: Verifying The Value Settings For The Wireless Lan Access Point - Sony CLIE PEG-UX50 Operating Instructions Manual

01US01COV.book Page 36 Friday, June 20, 2003 6:29 AM
Step 1: Verifying the value settings for the wireless
LAN access point (Page 36)
To connect to the Internet using the wireless LAN function, verify the value
settings for the wireless LAN access point.
Step 2: Using the check sheet (Page 37)
Use the check sheet to record the value settings provided by your System
Administrator and Internet Service Provider (ISP). For more information
you need, ask your System Administrator or Internet Service Provider.
Step 3: Setting up the wireless LAN function (Page 38)
You need to set up the wireless LAN function of you CLIÉ handheld,
referring to the check sheet with the value settings.
Step 1: Verifying the value settings for the
wireless LAN access point
To connect to the Internet using the wireless LAN function of your CLIÉ
handheld, you need the value settings below for the wireless LAN access point.
• SSID (also called ESSID or Network Name.)
• WEP key (also called Encryption.)
You may need a user ID or password depending on your wireless LAN access
point.
For details, ask the System Administrator of your wireless LAN network.
Tip
WEP key is a security function that encrypts transferred data.
Note
Your CLIÉ handheld uses the channels 1-11 (2.4GHz band of frequencies). If the
wireless LAN access point uses channels 12-14, you cannot communicate using the
wireless LAN function of your CLIÉ handheld.
36
Sony Personal Entertainment Organizer PEG-UX50/UX00 X-XXX-XXX-11 (1)