Battery; Operation; Preparations At The Workplace; Charging The Battery - Hilti NCR 120 PC-A22 Original Operating Instructions

Hide thumbs Also See for NCR 120 PC-A22:
Table of Contents

Advertisement

Noise values
Sound power level (L
WA
Uncertainty for the sound power level (K
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Vibration values
Total vibration (during operation) (a)
Uncertainty (K)
4.2

Battery

Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5

Operation

5.1

Preparations at the workplace

CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.2

Charging the battery

1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery.
5.3

Inserting the battery

CAUTION
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the battery holder until it engages with an audible click.
3. Check that the battery is seated securely.
5.4

Removing the battery

1. Press the release buttons on the battery.
2. Pull the battery out of its holder in the device.
5.5

Fitting the crimping / pressing die

WARNING
Risk of injury! Unintentional starting.
▶ Remove the battery before inserting, changing or removing the crimping die.
8
English
Printed: 26.10.2018 | Doc-Nr: PUB / 5449516 / 000 / 01
)
)
WA
)
pA
)
pA
80 dB(A)
2.5 dB(A)
70 dB(A)
2.5 dB(A)
2.5 m/s²
1.5 m/s²
21.6 V
−17 ℃ ...60 ℃
−20 ℃ ...40 ℃
−10 ℃ ...45 ℃

Advertisement

Table of Contents
loading

Table of Contents