Table of Contents
Advertisement
Network Settings
Connection Using a LAN
Cable
Connect this projector, the computer for controlling this
projector, and the switching hub using LAN cables,
followed by configuring the network.
Connection Example
When assigning a static IP address
You can acquire the IP address from the controlling
computer simply by configuring a network that consists of
this projector, the controlling computer, and switching
hub. Please refer to technical books on networks for
details.
Switching Hub
To Network
Terminal
NOTE:
● Make use of Cat. 5 (equivalent or higher) straight
100Base-TX LAN cables.
CAUTION:
● When connecting this projector and the controlling
computer for this projector using other network, be
sure to consult the network administrator of the
network in use or refer to technical books on networks.
When assigning IP address from the DHCP
server
Router
(DHCP Server)
WAN
LAN1
To Network
Terminal
NOTE:
● Make use of Cat. 5 (equivalent or higher) 100Base-TX
LAN cables.
24
DVI 1
e-shift Sync
DVI 2
CONTROL
USB
DVI 3
LAN
STANDBY/ON
OPERATE I/B
LAMP
DVI 4
WARNING
To LAN
RS-232C
Terminal
LAN
LAN2 LAN3 LAN4
DVI 1
e-shift Sync
DVI 2
CONTROL
USB
DVI 3
LAN
STANDBY/ON
OPERATE I/B
LAMP
DVI 4
To LAN
WARNING
RS-232C
Terminal
Specifications of PC for
Controlling this Projector
OS
Windows XP Professional SP2 /
Windows XP Home Edition SP2 /
Windows 7 Ultimate / Windows 7
Professional / Windows 7 Home
Premium
CPU
Pentium3 1 GHz or higher
Memory
256 MB and above
NOTE:
● Make use of Internet Explorer Ver. 6.0 or later.
● Windows is either registered trademark or trademark
of Microsoft Corporation in the United States and/or
other countries.
CAUTION:
● The PC specifications above are reference values for
the application software to run smoothly, and are not
intended to guarantee their operation.
Note that the applications may not run smoothly
depending on the condition of use of the respective
users even when the system requirements are
satisfied.
Advertisement
Table of Contents
