Introduction; Unpacking - A&D FS-i Series Instruction Manual

This manual describes how this scale works and how to get the most out of it
in terms of performance.
FS-i series check weighing scales have the following features:
The FS-i series has three kinds of weight display resolution, 1/3,000, 1/6,000
(~1/7,500) and 1/12,000 (~1/15,000) to cover various applications.
There are 2 sizes of weighing pan. The FS-30Ki has a larger pan and the FS-6Ki /
FS-15Ki has a smaller pan.
Weighing units are kg kilogram, g gram, lb pound; oz ounce; and lb-oz pound and
ounce.
Waterproof to IP-65 specifications.
Constructed from stainless steel for harsh working environment.
Large liquid crystal display with back lighting and analog sweep display of 60
segments with back lighting.
Scale may be operated by AC power source or an optional SLA (sealed lead acid)
battery.
Built in comparator with large and bright LED display of results.
Three colors of comparator results for better visibility.
Two modes of comparator operation, Target weight setting and Upper/Lower limits
setting.
Optional serial data and comparator relay interface.
Unpack the scale carefully and keep the packing material if you are likely to transport
the scale again in the future.
When unpacking, check whether all of the following items are included:
Display pod
Main power cord
Please confirm that the main
power type is correct for your
local voltage and receptacle.

2. INTRODUCTION

3. UNPACKING

Weighing pan
3
CAUTION
Do not pull the load cell cable.
Instruction manual
Base unit
FS-i series
INSTRUCTION MANUAL