Acura NSX 2020 Owner's Manual page 76

uuIndicatorsu
Indicator Name
POWER
SYSTEM
Indicator
READY Indicator
Active Damper
System Indicator
U.S.
Brake Wear
Indicator *
Canada
* Not available on all models
74
On/Blinking
• Comes on for a few seconds when
you set the power mode to ON,
then goes off.
• Comes on if there is a problem with
the electric vehicle system.
• Comes on when the vehicle is ready
to drive.
• Comes on for a few seconds when
you change the power mode to
ON, then goes off.
• Comes on if there is a problem with
the Active Damper System. The
speed of the vehicle will be limited.
• Comes on for a few seconds when
you change the power mode to
ON, then goes off.
• Comes on if a worn brake pad is
detected.
Explanation
• Comes on while driving - Have your
vehicle checked by an authorized Acura
NSX dealer immediately.
2 Turning on the Power P. 321
• Stays on constantly - Have the vehicle
checked by an authorized Acura NSX
dealer. With this indicator on, your vehicle
has normal damping ability without the
active damper feature.
2 Integrated Dynamics System P. 336
• Comes on while driving - The brake
pads may need to be replaced. Have your
vehicle inspected by an authorized Acura
NSX dealer.
Message
U.S.
Canada