Acura NSX 2020 Owner's Manual page 87

Hide thumbs Also See for NSX 2020:
Table of Contents

Advertisement

Message
• Appears when you close the door with the power mode
in ON without the keyless access remote inside the
vehicle.
• Appears when the keyless access remote battery
becomes weak.
• Appears if the keyless access remote battery is too weak
to turn on the power system or the key is not within
operating range to turn on the power system.
A beeper sounds six times.
• Appears three seconds after you bring the keyless
access remote in front of the ENGINE START/STOP
button when To Start, Hold Remote Near Start
Button appears. To Start Engine: Brake + Push
appears sequentially.
• Appears when you set the power mode to ACCESSORY
or ON.
• Appears if you press the ENGINE START/STOP button
while the vehicle is moving.
uuIndicatorsuDriver Information Interface Warning and Information Messages
Condition
Explanation
• Disappears when you bring the keyless access remote
back inside the vehicle and close the door.
2 Keyless Access Remote Reminder P. 129
• Replace the battery as soon as possible.
2 Replacing the Button Battery P. 418
• Bring the keyless access remote in front of the ENGINE
START/STOP button to be touched with.
2 If the Keyless Access Remote Battery is Weak P. 446
• Unless you bring the keyless access remote in front of
the ENGINE START/STOP button, this message does
not appear.
2 If the Keyless Access Remote Battery is Weak P. 446
2 Turning on the Power P. 321
• The message will disappear after six seconds or when
the power mode is set to VEHICLE OFF.
Continued
85

Advertisement

Table of Contents
loading

Table of Contents