Acura NSX 2020 Owner's Manual page 330

uuWhen DrivinguShifting
■
Shift Operation
328
Tachometer's red zone
Gear Position Indicator
EV
Gear Selection Indicator
D (Drive)
Gear Position Indicator
Gear Selection Indicator
D-Paddle
Gear Position Indicator
Gear Selection Indicator
M (Manual)
Press the
Press back the
Press the
Press the
Each time you press the
button, the mode switches between
D (drive) and M (manual) mode.
Shift Button
Indicator
1Shift Operation
P (
button.
R (
button.
N (
button.
D/M button.
D/M
NOTICE
( R
Before you change to and vice versa, come
D/M
to a complete stop and keep the brake pedal
depressed.
Operating the shift button before the vehicle has
come to a complete standstill may damage the
transmission.
Use the gear position indicator and the shift button
indicator to check the gear position before selecting
a shift button.
If the indicator of the currently selected gear position,
or all gear position indicators, are blinking
simultaneously, there is a problem with the
transmission.
Avoid sudden acceleration and have the transmission
checked by an authorized Acura NSX dealer as soon
as possible.
The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer's red zone (engine
speed limit). If this happens, you may experience a
slight jolt.
When the engine speed is increased while the
( N ( P ( R
, or , the fuel supply may
transmission is in
be cut off even without the engine speed entering
the tachometer's red zone.
The beeper sounds once when you change to
( R
.