Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2022 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
22h
64241 56641 64785
Advertisement
Table of Contents
Related Manuals for Daytona 64241
Summary of Contents for Daytona 64241
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Visit our website at: http://www.harborfreight.com 64241 56641 64785 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged.
-
Page 2: Important Safety Information
Check hydraulic oil level and fill as needed as stated on page 6. Thoroughly test the Jack for proper operation. If it does not work properly, bleed air from its hydraulic system as stated on page 6. Page 2 For technical questions, please call 1-888-866-5797. 64241 56641 64785... - Page 3 Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. 64241 56641 64785 For technical questions, please call 1-888-866-5797. Page 3...
-
Page 4: Specifications
Specifications Weight Capacity 3 Tons Weight Capacity (lb.) 6,000 Maximum Height (in.) 24.25 Minimum Height (in.) 3.25 Handle Length (in.) Hydraulic Oil non-detergent 22 weight Weight (lb.) Page 4 For technical questions, please call 1-888-866-5797. 64241 56641 64785... - Page 5 Overview Handle Foam Bumper Socket Handle Handle Release Bolt Lift Arm Saddle Foot Pedal 64241 56641 64785 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Attaching The Handle
Fill Plug hole slowly until the oil level just covers the top of the Piston inside the Cylinder. Cylinder 4. Replace the Fill Plug, close the Cover Plate, and reinstall the Screws. Figure B: Fill Level Page 6 For technical questions, please call 1-888-866-5797. 64241 56641 64785... -
Page 7: Operation
4. Lower the Jack completely. Then, store in a load high enough to clear the jack stands, safe, dry location out of reach of children. then carefully remove jack stands. 64241 56641 64785 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Maintenance And Servicing
Inject grease into each of the grease fittings. c. Lubricate the linkages and pivot points lightly. Note: Improper or inadequate lubrication voids the warranty. Page 8 For technical questions, please call 1-888-866-5797. 64241 56641 64785... -
Page 9: Troubleshooting
Follow instructions for Bleeding Trapped Air on page 6. Jack may have too much hydraulic oil inside, check oil level and adjust if needed. Fill Plug FILL LEVEL Piston Cylinder 64241 56641 64785 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Parts List
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 10 For technical questions, please call 1-888-866-5797. 64241 56641 64785... -
Page 11: Assembly Diagram
Assembly Diagram 64241 56641 64785 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 64241 and is the answer not in the manual?
Questions and answers