Daytona 64783 Owner's Manual & Safety Instructions

Daytona 64783 Owner's Manual & Safety Instructions

3 ton floor jack
Hide thumbs Also See for 64783:

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2022 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
22h
64200 56642 64783

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 64783 and is the answer not in the manual?

Questions and answers

Summary of Contents for Daytona 64783

  • Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Visit our website at: http://www.harborfreight.com 64200 56642 64783 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged.
  • Page 2: Important Safety Information

    Check hydraulic oil level and fill to 1/4″ below the Fill Plug hole as needed as stated on page 6. Thoroughly test the Jack for proper operation. If it does not work properly, bleed air from its hydraulic system as stated on page 6. Page 2 For technical questions, please call 1-888-866-5797. 64200 56642 64783...
  • Page 3 Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. 64200 56642 64783 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4: Specifications

    Weight Capacity 3 Tons Weight Capacity (lb.) 6,000 Maximum Height (in.) 18.25 Minimum Height (in.) Handle Length (in.) Hydraulic Oil non-detergent 22 weight Weight (lb.) Meets 2014 ANSI/ASME PASE standard. Page 4 For technical questions, please call 1-888-866-5797. 64200 56642 64783...
  • Page 5 Overview Handle Bumper Handle Socket Handle Lift Arm Saddle 64200 56642 64783 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6: Attaching The Handle

    Fill Plug hole slowly until the oil level just Cylinder reaches the top of the Piston inside the Cylinder. 4. Replace the Fill Plug, close the Figure B: Fill Level Cover Plate, and reinstall the Screws. Page 6 For technical questions, please call 1-888-866-5797. 64200 56642 64783...
  • Page 7: Operation

    5. To prevent accidents, turn off the tool and disconnect its power supply after use. Clean, then store the tool indoors out of children’s reach. 64200 56642 64783 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8: Maintenance And Servicing

    Inject grease into each of the grease fittings. Figure C: Fill Level c. Lubricate the linkages and pivot points lightly. Note: Improper or inadequate lubrication voids the warranty. Page 8 For technical questions, please call 1-888-866-5797. 64200 56642 64783...
  • Page 9: Troubleshooting

    Jack may have too much hydraulic oil inside, check fluid level and adjust if needed. Fill Plug FILL LEVEL Piston Cylinder Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com 64200 56642 64783 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10: Parts List

    Parts may not be interchangeable. Note: If product has no serial number, Specify UPC number when ordering parts: record month and year of purchase instead. Orange: 193175353405 Blue: 193175490667 Green: 193175490674 Page 10 For technical questions, please call 1-888-866-5797. 64200 56642 64783...
  • Page 11: Assembly Diagram

    Assembly Diagram 64200 56642 64783 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12: Limited 90-Day Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

This manual is also suitable for:

6420056642

Table of Contents