Ventair VWF150AS Installation And Wiring Instructions

Ventair VWF150AS Installation And Wiring Instructions

150mm wall mounted exhaust fan with auto shutters

Advertisement

150mm wall mounted exhaust
fan with auto shutters
Installation and Wiring Instructions
Model: - VWF150AS
Please read instructions in conjunction with illustrations
Please save these instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VWF150AS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ventair VWF150AS

  • Page 1 150mm wall mounted exhaust fan with auto shutters Installation and Wiring Instructions Model: - VWF150AS Please read instructions in conjunction with illustrations Please save these instructions...
  • Page 2 READ INSTRUCTIONS IN CONJUNCTION WITH THE ILLUSTRATIONS IMPORTANT 1. All fans must be fitted in accordance with AS/NZS3000 (known as SAA wiring rules). This unit should be installed by a licensed electrical contractor or similarly qualified person. 2. The fan should be sited away from direct sources of heat. 3.
  • Page 3 DESCRIPTION The VWF150AS fan is suitable for bathrooms, kitchens and laundry’s where a higher rate of extraction is required. These are available as wall mounted only (wall kit, not provided). FAN LOCATION A short circuit of the airflow should always be avoided, (Fig.1.) by siting the fan as far away as possible from, and opposite to the main source of, air replacement in the room.
  • Page 4 This product should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority for recycling advice. VENTAIR PTY.LTD 4 Capital Place Carrum Downs VIC 3201 - Made in the UK 411519A 1222...

Table of Contents