Table of Contents
Advertisement
Quick Links
INSTRUCTION MANUAL
This photo is for reference only; it does not mean you are purchasing an identical product.
Fan picture is for illustration purposes only. Styles may vary according to the model.
Installation Manual Rev 1.0
Model:
Orbital 45: ORB45
CONTENTS
CAUTION
• OVERVIEW
• ASSEMBLING
Read Instructions Carefully
• CARE AND MAINTENANCE
• TECHNICAL
For Safe Installation and Fan
• STORAGE AND DISPOSAL
Operation
• WARRANTY
230620
Advertisement
Table of Contents
Related Manuals for Ventair Orbital 45
Summary of Contents for Ventair Orbital 45
- Page 1 This photo is for reference only; it does not mean you are purchasing an identical product. Fan picture is for illustration purposes only. Styles may vary according to the model. Installation Manual Rev 1.0 Model: Orbital 45: ORB45 CONTENTS CAUTION • OVERVIEW •...
- Page 2 INSTRUCTION MANUAL Thank you for purchasing this Ventair Cooling Fan. To ensure correct function and safety, please read all instructions before using the product and keep all instructions for future reference. When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electrical shock and personal injury.
- Page 3 20. If the fan is not working properly, contact a qualified technician for examination and repair. Never attempt to dismantle the fan yourself. 21. Never install or store the unit where it could be subject to: Heat sources such as radiators, heat register, stoves or other products that produce heat Direct sunlight Mechanical vibration or shock...
-
Page 4: Assembling Your Fan
ASSEMBLING YOUR FAN Rear Grille Assembly Unscrew the 4 x Rear Grille Locking Screws (M5 x 6) from the Motor housing. Align the Rear Grille on the Motor Housing and fix it in place using 4 x Rear Grille Locking Screws (Figure 1). - Page 5 Front Grille Assembly Loosen the Grille Locking Screw on the bottom of the Grille Ring (do not loosen fully). Press the Grille Ring over the Rear Grille so that the Rear Grille fits into the groove on the Grill Ring. Position the Front Grille in front of the Rear Grille.
- Page 6 Clearance Required The fan must be installed such that: 1. It is at least 40cm from the side walls. 2. The blades are more that 2.1m above the floor The installation process described below, as well as the fixings provided, is for a concrete ceiling.
- Page 7 Oscillation Choose the desired angle when finishing all assembly. There are 3 adjustable angles: Small Angle: The unit starts working in a small angle. Middle Angle: Press the Rotating Bar up and make the Fixing Nut lock on the middle hole. Wide Angle: Press the Rotating Bar up and make the Fixing lock on the Outer hole.
-
Page 8: Electrical Connection
ELECTRICAL CONNECTION WARNING: FOR YOUR SAFETY, ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A LICENSED ELECTRICIAN. Carefully connect the wires as per the diagrams below: NOTE: AN ADDITIONAL ALL POLE DISCONNECTION MUST BE INCORPORATED IN THE FIXED WIRING IN ACCORDANCE WITH THE WIRING RULES. WALL SWITCH CONNECTION Important: Use only the provided wall switch with this fan;... -
Page 9: Operation
OPERATION WARNING 1. This fan must be installed by a licensed electrician. Improperly installed ceiling fans can be dangerous and expensive to repair; it will also void your warranty. 2. Make sure that the fan is fully assembled (and that the grilles are in place locked) before switching on. -
Page 10: Storage And Disposal
• If you consider there is an manufacturer defect to the fan motor, contact the warranty service line on 1300 665 926, or log the warranty at www.ventair.com.au/warranty You will need to provide the following information: • The name and contact details of the licensed electrician installer (if applicable).
Need help?
Do you have a question about the Orbital 45 and is the answer not in the manual?
Questions and answers