Sanyo PLC-XC50 Owner's Manual page 54

Setting
To Enter the PIN code
Select a number by pressing the Point
►
then press the Point
the pointer. The number changes to "". If you fixed
an incorrect number, move the pointer to the number
you want to correct by pressing the Point
then select the correct number by pressing the Point
buttons.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
"Set" by pressing the Point
button so that you can change the following PIN code lock
settings.
If you entered an incorrect PIN code, "PIN code" and the
number () turns red. Enter a correct PIN code all
over again.
To Change the PIN code lock setting
Select Off, On1, or On2 with the Point
then move the red frame pointer to "Quit" with the Point
button. Press the SELECT button to close the dialog box.
To Change the PIN code
The PIN code can be changed to your desired four-digit
number.
Select "PIN code change" with the Point
press the SELECT button to display the New PIN code
input dialog box.
Select a number by pressing the Point
►
then press the Point
the pointer. Repeat it to complete entering a four-digit
number. After entering the four-digit number, move the
pointer to "Set" by pressing the Point
the SELECT button.
CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE
PIN CODE NO . MEMO ON PAGE 7, AND KEEP IT
SECURELy . IF yOU FORGET yOUR PIN CODE, THE
PROjECTOR CAN NO LONGER BE STARTED .
54
▲▼
buttons. And
button to fix the number and move
◄
►
button. Press the SELECT
◄►
buttons and
▼
▲▼
buttons. And
button to fix the number and move
►
button. Then press
Enter a PIN code
button, and
▲▼
▼
Move the pointer to "Set" by pressing
the Point
the SELECT button.
Change the PIN code lock setting
button, and
Change the PIN code
The input numbers change

to " " for security.
►
button. And then press
Select a desired setting with the
Point ◄► buttons.
S e l e c t P I N c o d e c h a n g e a n d
press the SELECT button. The
New PIN code input dialog box
appears.
The input numbers are being
displayed for confirmation.