Table of Contents
Advertisement
Adjusting the Projector
Adjusting the Projector Height
The projector is equipped with an elevator foot to adjust the image height.
To raise or lower the image:
1.
To raise or lower the image, press the elevator button and raise or lower the front of the
projector. Release the button to lock the adjustment.
2.
To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height.
To avoid damaging the projector, make sure that the elevator foot and tilt-adjustment
foot are fully retracted before placing the projector in its carrying case.
The tilt-adjustment foot in the bottom of the projector will fall from the projector when you
loosen the foot to the maximum. In this case, turn it back into position. Do not let the tilt-
adjustment foot fall from the projector when making the adjustment.
Adjusting the Projector Zoom and Focus
1.
Focus the image by rotating the focus ring. A still image is recommended for focusing.
2.
Adjust the image by sliding the zoom ring.
Zoom ring
Focus ring
Tilt-adjustment foot
Elevator foot
Elevator button
EN-19
Advertisement
Table of Contents
