Appendix; Led Indicator Messages - Sanyo PDG-DSU20B Owner's Manual

Appendix

LED Indicator Messages

LED Type
LAMP LED
TEMP LED
LAMP LED
TEMP LED
LAMP LED
TEMP LED
LAMP LED
TEMP LED
LAMP LED
TEMP LED
LAMP LED
TEMP LED
LAMP LED
TEMP LED
Optional Parts
The parts listed below are optionally available. When ordering those parts, give the item name
and Model No. to the sales dealer.
COMPONENT-VGA Cable
Soft Carrying Case
Color Status
Green Flash
Off -
Green Solid
Green Flash
Green Solid
Green Solid
Amber Solid
Green Solid
Amber Solid
Amber Solid
Green Solid
Red Flash
Amber Solid
Off -
: POA-CA-COMPVGA
: POA-CAC-VCL2
Meaning
The projector is in standby mode.
The projector system has some problems with its
fan, so the projector cannot start up.
The lamp is in good condition and is projecting at
maximum brightness.
The lamp has reached its end of life and must be
changed soon. The lamp will continue to operate
until it fails. Change the lamp. If the lamp is off,
then the ballast will become malfunction.
The projector is shutting and the fan motor is
cooling the lamp for shutdown. Do not unplug the
power cord or turn the power off before the Lamp
LED changes to flashing. The fan motor will turn
off when the lamp has cooled.
Temperature is too high. The lamp will turn off.
The fan motor is cooling the lamp.
The lamp ignition failed. If temperature is too high,
the fans will cool the lamp.
EN-29