First Use; Personalisation - Zanussi ZWH 7149 P User Manual

SHOWER
BATH
WASHING
MACHINE
RAINWATER
'RUN-OFF'
SURFACE WATER
DRAINS & SEWERS
UNTREATED
DISCHARGE
RIVER
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical information on
the rating plate agree with your domestic
power supply.
• Always use a correctly installed shockproof
socket.

First use

• Ensure that the electrical and water con-
nections comply with the installation in-
structions.
• Ensure that the drum is empty.
• Before the first wash, run a cotton cycle
at the highest temperature without any

Personalisation

Buzzer
The appliance is provided with an acoustic de-
vice, which sounds in the following cases:
• at the end of the cycle;
• if there is a fault.
www.zanussi.com
SINK TOILET
BIDET
DISHWASHER
FOUL DRAIN
FOUL SEWERS
SEWAGE TREATMENT
WORKS
TREATED DISCHARGE
RIVER
• Do not use multi-way plugs, connectors and
extension cables. There is a risk of fire.
• Do not replace or modify the mains cable
yourself. Contact the After Sales Service.
• Make sure that the mains plug and cable is
not squashed or damaged by the back of the
appliance.
• The mains plug must be accessible without
moving machine to enable electrical isolation
of appliance prior to cleaning or service.
• Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
• This appliance complies with the E.E.C. Di-
rectives.
Warning! The appliance is supplied with a
13 amp plug attached. Use a 13 amp
ASTA approved (BS 1362) fuse if it is
necessary to change the fuse in the plug
supplied. A cut off plug inserted into a 13 amp
socket is a serious safety danger. Make sure
that it is disposed of safely.
laundry in the machine, to remove any
manufacturing residue from the drum
and tub. Pour 1/2 a measure of deter-
gent into the main wash compartment
and start the machine.
By pressing the 4 and
5 buttons simultane-
ously for about 6 sec-
onds, the acoustic
signal is deactivated
(except if there is a
fault).
11