Camera is not functioning normally underwater
•
Check each housing control while underwater to ensure that
they are disengaged. An inadvertently engaged control may limit
functioning of the camera.
•
Check that no controls are being accidentally pressed.
•
Check that the shutter is not half depressed. If the shutter spring
has been damaged by activation without a camera installed, it may
not return properly. Adjust or replace the shutter spring.
Backscatter or "snow" in images
•
Reposition strobe(s) or light(s) to light up the subject only and not
the water in-between the camera and subject.
•
Avoid using strobes in extremely low-visibility conditions.
Spare Parts
Rear o-ring # 0110
Front o-ring # 0132.36
Trigger lever extension # 4077.95
Silicone lubricant # 5020
Push button o-ring kit # 6201.03
.050" hex key # 0945.11
26