Ikelite 69121 Manual page 25

Underwater housing for sony zv-e1 mirrorless cameras
Table of Contents

Advertisement

Photos are over-exposed (too light)
Adjust aperture (smaller), shutter speed (faster), or ISO (lower)
setting.
Move light(s) farther away from your subject.
Adjust exposure compensation in the camera.
Adjust lighting power.
Photos are under-exposed (too dark)
Adjust aperture (larger), shutter speed (slower), or ISO (higher)
setting.
Move light(s) closer to your subject and make sure they are pointed
in the right direction.
Adjust exposure compensation in the camera.
Adjust lighting power.
Button(s) are sticking
Soak the housing in lukewarm fresh water. Depress each button
several times while the housing is submerged. Rinse the housing
with running fresh water.
Lubricate the controls.
Button(s) or control(s) not operating
Tighten the camera mounting plate with a screwdriver.
Ensure that nothing is preventing the camera from going all of the
way into the housing.
Check that the camera mounting plate is pushed all of the way
forward.
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

200dlm/a

Table of Contents