Setting And Using Call Guard - Sanyo SCP-6000 User Manual

Setting and Using Call Guard

In addition to the roaming icon, the Call Guard alerts you
when roaming charges apply. This feature makes it easy to
manage your roaming charges by reminding you when you
make or receive roaming calls. It also requires you to take
additional steps before placing or answering a roaming
call. These additional steps are not required when you make
or receive calls while on the Sprint PCS Nationwide
Network.
To Turn the Call Guard Feature On or Off:
From the Standby mode, press
1.
main menu.
Highlight and press
2. Roaming
Highlight
3. Call Guard
Highlight or and press
4. On Off
To Place Roaming Calls With Call Guard On:
From the Standby mode, dial 1 + area code + the
1.
seven-digit number. (You can also initiate a call from
the Internal Phone Book, Call History or Sprint PCS
Web Messages.)
Press (or press
2.
press ).
Press to proceed.
3.
or
Press , highlight
To Answer Incoming Roaming Calls With
Call Guard On:
Press and then
OR
Press , highlight
Remember if the Call Guard feature is set to
take extra steps to make and receive roaming calls.
to display the
.
and press .
.
, highlight and
Call
and press .
Roam Call
to accept.
and press .
Answer
, you need to
On
Understanding Roaming 27
Note:
Speed Dialing is not
available when you
are roaming with the
Call Guard enabled.