Table of Contents
Advertisement
Recording your Name
You can add your name to the pre-recorded announcement.
Follow these steps:
From the Standby mode, press
1.
and press
Screen Call
Highlight
2.
Announcement
Highlight
3.
Pre-recorded
Press
.
4.
Highlight
5.
Record Name
Press
.
6.
Press
to start 1st recording.
7.
When your name has already been recorded, select
or
for overwriting.
No
After the 1st recording, press
8.
2nd recording.
To stop recording, wait for 12 seconds or press
9.
(It's available for both 1st and 2nd recording.)
Select
at step 5 above, and then select
Erase name
to erase the recorded name.
Recording Custom Announcement
Follow the above steps 1 and 2.
1.
Highlight
.
2.
Custom
Press
.
3.
Highlight
, and press
4.
Record
Press
to start recording. You can record for 12
5.
seconds.
When the announcement has already been recorded,
select
or
for overwriting.
Yes
No
After the 1st recording, press
6.
2nd recording.
To stop recording, wait for 12 seconds or press
7.
(It's available for both 1st and 2nd recording.)
Using the Voice Services of Your Sprint PCS Phone 133
, highlight
.
, and press
.
.
.
Yes
again to start the
.
Yes
.
again to start the
.
Tip:
You should record
the announcement
twice because the
phone needs to
adjust to the base
station programs.
Advertisement
Table of Contents
