Table of Contents
Advertisement
Installing the Battery
Your Sprint PCS Phone comes with a LiIon battery. Follow
these steps to install it:
Place the battery into the space beneath the antenna
1.
with the metal contacts at the bottom, facing
downward.
Gently press down until it's in place and the battery
2.
release latch snaps.
Removing the Battery
To remove your battery for charging or for another reason,
follow these easy steps:
Make sure the power is off so that you don't lose any
1.
stored numbers or messages.
Press up on the battery release latch and hold the
2.
battery, then pull it up and out at a 45-degree angle.
Getting To Know Your Sprint PCS Phone 19
Advertisement
Table of Contents
