• Please use approved power cord provided by Philips all the time. If your power cord is missing, please 1.1 Safety precautions and contact with your local service maintenance center.
Page 4
Important • Reposition your screen to ap- • Do not store or use the monitor in propriate height and angle ac- locations exposed to heat, direct cording to your height. sunlight or extreme cold. • Adjusting the brightness and • In order to maintain the best contrast to appropriate level.
Important Service 1.2 Notational Descriptions • The casing cover should be opened The following subsections describe only by qualified service personnel. notational conventions used in this • If there is any need for any document. document for repair or integration, please contact with your local Notes, Cautions and Warnings service center.
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back...
Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
Page 8
Setting up the monitor Connecting to your PC Connect to PC 1. Connect the power cord to the back 170S9 of the monitor firmly. 2. Turn off your computer and unplug its power cable. 3. Connect the monitor signal cable to the video connector on the back of your computer.
What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
Page 10
Setting up the monitor The OSD Menu Resolution notification Below is an overall view of the structure This monitor is designed for optimal of the On-Screen Display. You can use performance at its native resolution, this as a reference when you want to 1280 x 1024@60Hz.
Setting up the monitor Note 2.3 Remove the Base Assembly This monitor accepts a 100mm x 100mm for VESA Mounting VESA-Compliant mounting interface. Before you start disassembling the VESA Mounting Screw M4. Always monitor base, please follow the contact manufacturer for wall-mount instructions below to avoid any possible installation.
How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. Based on a scenario you select, • EasyRead: Helps improve reading SmartImage dynamically enhances the of text based application like PDF contrast, color saturation and sharpness ebooks.
Image Optimization • Photo: This profile combines color Note saturation, dynamic contrast and Philips LowBlue mode, mode 2 sharpness enhancement to display compliance with TUV Low Blue Light photos and other images with certification, you can have this mode by...
Page 15
Technical Specifications AC Input AC Input AC Input Heat Dissipation* Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 50Hz 230VAC , 50Hz 44.37 BTU/hr 44.71 BTU/hr 45.05 BTU/hr Normal Operation (typ.) (typ.) (typ.) Sleep (Standby) <1.02 BTU/hr <1.02 BTU/hr <1.02 BTU/hr <1.02 BTU/hr...
Page 16
Finish Texture Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
Power Management The following setup is used to measure 5. Power Management power consumption on this monitor. • Native resolution: 1280 x If you have VESA DPM compliance 1024@60Hz display card or software installed in your PC, the monitor can automatically • Contrast: 50% reduce its power consumption when • Brightness: 70%...
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced...
Page 20
Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
Page 21
Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
For further assistance, refer to the period may cause "burn in", also Consumer Information Centers list known as "after-imaging " or "ghost and contact Philips customer service imaging", on your screen. "Burn-in", representative. "after-imaging", or "ghost imaging" * Functionality different according to is a well-known phenomenon in display.
Page 25
Ans.: In general it is recommended disconnect your old monitor and that the panel surface is not reconnect your Philips LCD monitor. subjected to excessive shocks • Turn on your monitor and then turn and is protected from sharp or on your PC.
Page 26
“ghost image” symptoms any PC, workstation or Mac? that will not disappear and cannot be repaired. The damage mentioned above Ans.: Yes. All Philips LCD monitors are is not covered under your warranty. fully compatible with standard PCs, Macs and workstations.
Page 27
Troubleshooting & FAQs Q13: How to unlock/lock my hot key? Ans.: Please press for 10 seconds to unlock/lock the hot key, by doing so, your monitor pops out “Attention” to show the unlock/lock status as shown below illustrators. ...
Page 28
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.