Related Manuals for Philips X Line X Line 55BDL3207X
Summary of Contents for Philips X Line X Line 55BDL3207X
- Page 1 Professional Display Solutions X Line 55BDL3207X User Manual (English) www.philips.com/ppds...
-
Page 2: Table Of Contents
9.2. Troubleshooting ..........46 3.3.5. Operating range of the remote control ...........25 10. Technical Specifications ..........47 Connecting External Equipment ......26 Warranty policy for Philips Professional Display 4.1. Connecting External Equipment Solutions .................49 (Multimedia Player) .........26 Index ..................51 4.1.1. Using HDMI video input ....26 4.2. -
Page 3: Safety Instructions
When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. •... - Page 4 55BDL3207X Environmental absolute ratings Item Min. Max. Unit Storage temperature °C Operation temperature °C Glass Suraface temperature °C (Operation) Storage humidity % RH Operating humidity % RH • LCD panel temperature need to be 25 degrees Celsius at all time for better luminance performance. •...
- Page 5 55BDL3207X EU Declaration of Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), RoHS directive (2011/65/ EU).2009/125/EC(Erp directive). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these harmonized standards published under Directives of Official Journal of the European Union.
- Page 6 55BDL3207X Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
- Page 7 55BDL3207X Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:+ 1. Remove fuse cover and fuse. 2.
- Page 8 55BDL3207X China RoHS 根据中国大陆《电器电子产品有害物质限制使用管理办法》，以下部分列出了本产品中可能包含的有害 物质的名称和含量。 有害物质 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 外壳 ○ ○ ○ ○ ○ ○ 液晶显示屏 × ○ ○ ○ ○ ○ 电路板组件* × ○ ○ ○ ○ ○...
- Page 9 Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
- Page 10 For more information about E -waste please visit http://www.india.philips.com/about/sustainability/recycling/index.page and to know where you can drop off your waste equipment for recycling in India please contact on below given contact details.
- Page 11 55BDL3207X Batteries For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes.
-
Page 12: Unpacking And Installation
55BDL3207X Unpacking and Installation 2.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • As this product is high and heavy, the operation of moving the device is recommended to be performed by two technicians. •... - Page 13 55BDL3207X • Please keep the display in a vertical position when moving it. • Place the display vertically and its weight should spread evenly on the surface. • Avoid bending and torsion during transportation.
-
Page 14: Unpacking Inspection Instructions
55BDL3207X 2.2. Unpacking Inspection Instructions • Read the inspection instructions before opening the packaging. (The inspection instructions are printed on the top of the box). • Ensure the product is in good condition prior to the removal of sealing labels, or the warranty will be void. 1. - Page 15 55BDL3207X 5. Connect the power cord to the back of the display. Plug the other end of the power cord into an electric outlet to power on the display. Sealing Labels Sealing Labels AC Inlet << Back Side >> Caution 1.
- Page 16 55BDL3207X 8. Install the wall mount kit. Wall mount kit << Back Side >> Caution 1. Follow the inspection instructions printed on the box. 2. Ensure the product is in good condition prior to the removal of sealing labels, or the warranty may be void. 9.
-
Page 17: Package Contents
55BDL3207X 2.3. Package Contents Please verify that you received the following items with your package content: • LCD display • Remote control with AAA batteries • Quick start guide • Power cord • Display Port Cable Remote Control Quick start guide •... -
Page 18: Mounting On A Wall
55BDL3207X 2.5. Mounting on a Wall To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you use a mounting interface that complies with TUV-GS and /or UL1678 standard in North America. Protective Sheet VESA Grid Table... -
Page 19: Mounting In Portrait Orientation
Mounting in Portrait Orientation This display can be installed in portrait orientation. Rotate the display 90 degrees counterclockwise based on the back view. The “PHILIPS” LOGO should be on the LEFT side when facing the backside of the display. 90°... -
Page 20: Operating Instructions Of Edge Alignment Kit
55BDL3207X 2.7. Operating Instructions of Edge Alignment Kit 2.7.1. Installing the Edge Alignment Kit • Before installing the edge alignment kit, the display must be mounted to the frame of video wall correctly. • We recommend you contact a professional technician when installing the edge alignment kit. We are not responsible for any damage to the product if the installation is not performed by a professional technician. -
Page 21: Using The Edge Finishing Kit (Optional)
55BDL3207X 2.8. Using the Edge Finishing Kit (Optional) You could use the edge finishing kit to protect the display and have a better appearance. EFK5563/00 EFK5563/00 EFK5533/00 EFK5533/00 (Edge Finishing Kit (Edge Finishing Kit (Edge Finishing Kit (Edge Finishing Kit Left/Right) Top/Bottom) Top/Bottom) -
Page 22: Using The Gap Pad
55BDL3207X 2.9. Using the gap pad 4. Apply another gap pad on the side surface and repeat the same process as step 3. Use the gap pad to ensure appropriate space between cascaded displays during video wall installation. 1. Remove the release sheet from the gap pad. 2. -
Page 23: Parts And Functions
55BDL3207X Parts and Functions 3.1. Control Panel [ ] button [MENU] button Press this button to turn the display On or turn the display Return to the previous menu while the OSD menu is On. to standby mode. This button can also be used to activate the OSD menu when the OSD menu is Off. -
Page 24: Input/Output Terminals
55BDL3207X 3.2. Input/Output Terminals EXT. SPK TERMINAL SPEAKER SWITCH DP OUT Service Port AUDIO OUT 100-240V IR IN 50/60Hz 2.5A DVI IN HDMI 1 IN HDMI 2 IN VGA IN DP IN PC LINE IN Control IN Control OUT RJ45 IN RJ45 OUT AC IN PC LINE IN... -
Page 25: Remote Control
55BDL3207X 3.3. Remote Control ] INFO button Display information about current activity 3.3.1. General functions [ ][ ][ ][ ]NAVIGATION buttons Navigate through menus and choose items.. ] button Confirm an entry or selection. ] BACK button Return to the previous menu page or exit from the previous function. -
Page 26: Id Remote Control
55BDL3207X 3.3.2. ID Remote Control Press [ID] button. The red LED blinks twice. 1. Press [ID SET] button for more than 1 second to enter the Set remote control ID number when using several displays. ID Mode. The red LED lights up. Press the [ID SET] button again to exit from ID mode. -
Page 27: Inserting The Batteries In The Remote Control
55BDL3207X 3.3.3. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Insert batteries with the correct polarity (+) and (-). 3. -
Page 28: Connecting External Equipment
55BDL3207X Connecting External Equipment 4.1. Connecting External Equipment (Multimedia Player) 4.1.1. Using HDMI video input AUDIO OUT HDMI 1 IN HDMI 2 IN [HDMI IN] HDMI Out Multimedia Player 4.2. Connecting a PC 4.2.1. Using VGA input VGA IN DP IN PC LINE IN VGA Out Audio Out... -
Page 29: Using Hdmi Input
55BDL3207X 4.2.3. Using HDMI input HDMI 1 IN HDMI 2 IN HDMI Out [HDMI IN] 4.2.4. Using DisplayPort input DisplayPort Out [DisplayPort IN] DP IN 4.3. Connecting Audio Equipment 4.3.1. Connecting an external audio device Audio In [AUDIO OUT] AUDIO OUT Stereo Ampli�er... -
Page 30: Connecting Multiple Displays In A Daisy-Chain Configuration
55BDL3207X 4.4. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a menu board. 4.4.1. Display control connection Connect laptop [RJ45] to [RJ45 IN] of DISPLAY 1, connect the [RJ45 OUT] connector of DISPLAY 1 to the [RJ45 IN] connector of DISPLAY 2. - Page 31 55BDL3207X Connect laptop [DVI] to [DVI IN] of DISPLAY 1, connect the [DP OUT] connector of DISPLAY 1 to the [DP IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 [DVI] [DVI IN] [DP OUT] [DP IN] Connect laptop [HDMI] to [HDMI IN] of DISPLAY 1, connect the [DP OUT] connector of DISPLAY 1 to the [DP IN] connector of DISPLAY 2.
-
Page 32: Ir Connection
55BDL3207X 4.5. IR connection External IR Receiver DISPLAY 1 DISPLAY 2 [Control IN] [IR IN] [Control OUT] NOTE: 1. The remote control sensor of this display will stop working if the [IR IN] is connected. 2. IR loop through connection can support up to 9 displays. 3. -
Page 33: Operation
55BDL3207X Operation 6.1.2. Navigating the OSD menu using the display’s control buttons NOTE: The control button described in this section is mainly on 1. Press [MENU] button to display the OSD menu. the remote control unless specified otherwise. 2. Press [ ] or [ ] button to choose the item you want to adjust. -
Page 34: Screen Menu
55BDL3207X Color(Saturation) Local Dimming Adjust the color of the screen. Turn the local dimming function On/Off. Overscan Press + button to increase color depth. Press - button to decrease color depth. Change the display area of the image. NOTE: VIDEO mode only ON: Set to display area about 95%. -
Page 35: Audio Menu
55BDL3207X Zoom mode V position PC mode: {Full} / {4:3} / {1:1} / {16:9}/ {21:9}/ {Custom}. Moves the vertical position of the image up or down. Video mode: {Full} / {4:3} / {1:1} / {16:9}/ {21:9}/ {Custom}. *Zoom mode setting is defined by input. If input in multi- windows, the setting will apply for windows with the same Auto adjust input. -
Page 36: Pip Menu
55BDL3207X Maximum volume PBP 2Win Adjust your own limitation for the maximum volume setting. This stops the volume from being played too loudly. Minimum volume Sub Win1 Input Adjust your own limitation for the minimum volume setting. Mute Quick swap Turn the mute function on/off. -
Page 37: Configuration 1 Menu
Audio RS232 routing RS232/LAN Choose from : {Off} / { On} Boot on source Action Light sensor (require Philips accessory CRD41 External Configuration 1 Sensor Box) Configuration 2 Light sensor Choose to turn on or off backlight adjustment according to... -
Page 38: Configuration 2 Menu
55BDL3207X 6.2.6. Configuration 2 menu Monitor ID Set the ID number for controlling the display via the RS232C connection. Each display must have a unique ID number Picture OSD turn off when multiple sets of this display are connected. Monitor ID Screen OSD H position number range is between 1 to 255. -
Page 39: Advanced Option Menu
55BDL3207X 6.2.7. Advanced option menu Monitor information Shows information about your display, including model number, serial number, operating hours and software Picture Input resolution Auto version. Screen IR control Action Monitor information Audio Keypad control Action Tiling Action Model name XXXXXX Serial NO. - Page 40 55BDL3207X Keypad control H monitors Choose to enable or disable the display Keypad (control buttons) function. Position • {Unlock} - Enable the Keypad function. • {Lock All} / {Lock all but Volume} / {Lock all but Power} / {Lock all except PWR & VOL} - Disable the Keypad function.
- Page 41 55BDL3207X • {Enable} - Choose to enable or disable the Tiling function. daylight start date the clock should be put forward 1 hour at If enabled, the display will apply the settings in {H 2 o’clock. At daylight stop date the clock should be put back monitors}, {V monitors}, {Position}, and {Frame comp.}.
- Page 42 55BDL3207X Mode 4: [TCP on, WOL off, no auto on/off] Input-source selection: Press [ ] or [ ] button to select an input source. If no input source is selected, DC off -> Back light off, LED: Red the input source will remain the same as last selected. Power Save ->...
-
Page 43: Input Mode
55BDL3207X Input Mode Item Resolution References H.Freq.(kHz) V.Freq.(Hz) Note 640x480 VESA DMT, CEA-861-F Format 1 31.469 59.940 640x480 VESA DMT 37.861 72.809 640x480 VESA DMT 37.500 75.000 640x480 VESA DMT 43.269 85.008 800x600 VESA DMT 37.879 60.317 800x600 VESA DMT 48.077 72.188 800x600... - Page 44 55BDL3207X ITU-R BT.1358, CEA-861-F Formats 576p 31.250 50.000 17 & 18 1080i SMPTE 274M, CEA-861-F Format 20 28.125 50.000 1080i SMPTE 274M, CEA-861-F Format 5 33.750 60.000 720p SMPTE 296M, CEA-861-F Format 19 37.500 50.000 720p SMPTE 296M, CEA-861-F Format 4 45.000 60.000 1080p...
-
Page 45: Pixel Defect Policy
However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- &... -
Page 46: Dark Dot Defects
Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub-pixel defects exceeding the tolerances listed in the following table. -
Page 47: Cleaning And Troubleshooting
55BDL3207X HOW TO AVOID MURA Although we can not guarantee the complete eradication of Mura every time, in general the appearance of Mura can be minimized by these methods: • Lower the backlight brightness • Use a screen saver • Reduce the ambient temperature around the unit Cleaning and Troubleshooting 9.1. -
Page 48: Troubleshooting
55BDL3207X 9.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of 2. Make sure the power switch is the display is not switched on. switched on. -
Page 49: Technical Specifications
55BDL3207X 10. Technical Specifications Display: Specifications Item 55BDL3207X Screen Size (Active Area) 54.6” (138.7 cm) LCD Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.63 (H) x 0.63 (V) [mm] Displayable colors 10bit,1.07B colors Brightness (typical) 700 cd/m Contrast ratio (typical) 1200:1... - Page 50 55BDL3207X General: Specifications Item 55BDL3207X Power Supply AC 100 - 240V, 50/60Hz Power Consumption (Max) 340 W Power Consumption (Typ.) 170 W Power Consumption (Standby & Off) <0.5W Dimensions [W x H x D] 1213.4mm(W)x 684.2mm(H)x 99.35mm(D_Max)/98.2mm(D_Wallmount) Weight 26.17 Kg Gross Weight 35.8 Kg On Mode Power Consumption (W)
-
Page 51: Warranty Policy For Philips Professional Display Solutions
LIMITED WARRANTY In the unlikely event the product requires service, we will arrange for your Philips product to be serviced free-of-charge within the warranty period, provided that the product was used in accordance with the user manual (e.g. in the intended environment). - Page 52 Warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow their warranty statement. Standard warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow the local warranty statement.
-
Page 53: Index
Index Warranty policy for Philips Professional Display Solutions Cleaning and Troubleshooting 45 Connecting a PC 26 Connecting Audio Equipment 27 Connecting External Equipment 26 Connecting External Equipment (Multimedia Player) 26 Connecting Multiple Displays in a Daisy-chain Configuration 28 Control Panel 21... - Page 54 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.