Table of Contents
Advertisement
E18 V1.0 ZigBee Ad Hoc Network Module
Chengdu Ebyte Electronic Technology Co., Ltd.
Sample URL: cdebyte.taobao.com
For more product information, please visit: www.cdebyte.com
Module output:
"OK\r\n"
wait a few seconds
Module output:
"NET:JOIN\r\n"
☆.The module is successfully connected to the network
Enter the AT command "AT+INFO?", and enter "\0\0\0\0\0\0AT+INFO?" in the sleep terminal
Module output:
" TYPE=SleepyEndDevice\r\n
MAC=0x50325FFFFECA5EC1\r\n
PANID=0xB3BB\r\n
CHANNEL=20\r\n
ADDR=0x3F48\r\n"
4.2.2 Data transparent transmission
Step 1: Set the transparent transmission target
☆.Set the serial port of the coordinator as the transparent transmission target
Input AT command "AT+DSTADDR=0000", input "\0\0\0\0\0\0 AT+DSTADDR=0000" in sleep terminal
Module output:
"OK\r\n"
Input AT command "AT+DSTEP=1", input "\0\0\0\0\0\0 AT+DSTEP=1" in sleep terminal
module output：
"OK\r\n"
Step 2: Switch to transparent transmission mode
Method 1: Enter the AT command "AT+SEND", and enter "\0\0\0\0\0\0 AT+SEND " in the sleep terminal
Module output:
"SEND_MODE\r\n"
Method 2: Enter the AT command "AT+RESET", enter "\0\0\0\0\0\0 AT+RESET" in the sleep terminal, or reset the
module
Module output:
"OK\r\n"
Wait 1~2 seconds
Module output:
"BOOT=0\r\n
VERSION=0\r\n
SEND_MODE\r\n"
Wait for 1~2 seconds, the dormant terminal connects to the parent node
module
output:（Note that there is no carriage return at the end）
"NET"
The third step: data transparent transmission
Enter the transparent data "HelloWorld", and enter " \0\0\0\0\0\0HelloWorld " in the sleep terminal
Because professional, so choose!
Wireless application experts such as wireless transparent transmission,
WiFi, Bluetooth, Zigbee, PKE, digital radio, etc.
Page 1 of 40
The copyright and the final interpretation right of the product belong to Chengdu Ebyte
Electronic Technology Co., Ltd.
Advertisement
Table of Contents
