MAINTENANCE AND SERVICE
Removing the plastic cover for
bulb replacement
The bulb in the halogen headlamp can be
replaced without the help of a workshop, but
the plastic cover over the headlamp must be
removed before a bulb can be replaced.
Press down the pins into the plastic cov-
–
er's four clips using a screwdriver or simi-
lar and lift away the cover.
18
LED (Light Emmitting Diode)
630
NOTE
Points to remember when the cover is
refitted:
The pin in the clip needs to be pressed
•
back fully before the clip is refitted in
the cover.
When the cover is refitted, the pin
•
must be pressed in until the end sur-
face is level with the surface of the clip.
Related information
Bulb replacement (p. 629)
•
Replacing the dipped beam bulb (p. 631)
•
Replacing the main beam lamp (p. 632)
•
Replacing daytime running light bulb/posi-
•
tion lamp bulb, front (p. 633)
Replacing the front direction indicator
•
bulb (p. 634)
Bulb specifications (p. 638)
•
Exterior lamp positions
The exterior lighting of the car uses a number
18
of different lamps. An LED
type lamp must
be replaced by a workshop. An authorised
Volvo workshop is recommended.
Lamps, front (car with halogen
headlamps)
Dipped beam
Main beam
Daytime running lights/position lamps
Indicator
Front fog lamps/cornering lights* (LED)
* Option/accessory.