Using Main Beam - Volvo S90 2019 Owner's Manual

vated when the car's electrical system is in
ignition position II.
Tunnel detection
The car detects when it is driven into a tunnel
and switches from daytime running lights to
dipped beam.
Note that the rotating ring in the left-hand
stalk switch must be in mode for tunnel
detection to work.
Related information
Lighting control (p. 150)
•
Ignition positions (p. 424)
•
Daytime running lights (p. 154)
•
Replacing the dipped beam bulb (p. 631)
•
5 When dipped beam is activated.

Using main beam

Main beam is operated with the left-hand
stalk switch. Main beam is the car's stron-
gest lighting and should be used when driv-
ing in the dark for better visibility, as long as
it does not dazzle other road users.
Steering wheel stalk switch with rotating ring.
Main beam flash
Move the stalk switch backwards slightly
to main beam flash position. Main beam
comes on until the stalk switch is
released.
Main beam
Main beam can be activated when the
steering wheel stalk switch's rotating ring
5
is in position or
main beam by moving the stalk switch for-
wards.
Deactivate by moving the stalk switch
backwards.
When main beam has been activated the
symbol illuminates in the driver display.
Related information
Lighting control (p. 150)
•
Active main beam (p. 156)
•
Replacing the main beam lamp (p. 632)
•
. Activate
LIGHTING
155