Panasonic LUMIX DC-GX9N Basic Operating Instructions Manual page 51

1 Set mode dial to [
2
Set the menu
→
Settings: [40SEC] / [20SEC] / [OFF]
3
Set the crop start frame and press
[MENU/SET] to set
• Set the crop end frame as well.
• When making settings for the first time, a crop
start frame of size 1920×1080 is displayed.
• Move the frame by touching it or using the cursor
button. You can adjust the frame size by pinching
out/pinching in or rotating the rear dial.
4 Press the motion picture button (or the
shutter button) to start recording
Elapsed recording time
Set operating time
• Immediately release the motion picture button (or the shutter button) after
pressing it.
• When the set operating time has elapsed, recording automatically ends. To
end recording midway, press the motion picture button (or the shutter button)
again.
■
Changing the position and size of a crop frame
Press [Fn2] button while the recording screen is displayed, and perform step
■
To cancel [4K Live Cropping] recording
Set [OFF] in step
●
The angle of view narrows.
●
Brightness is measured and focus is adjusted in the crop start frame. When
recording a motion picture, brightness is measured and focus is adjusted in the
crop frame. To fix the focus position, set [Continuous AF] to [OFF], or set the
focus mode to [MF].
●
[Metering Mode] will be [
]
[Creative Video] → [4K Live Cropping]
2
.
] (Multi Metering).
Recording
Start Start
Size Size
Reset Reset
DVQX1391 (ENG)
Set Set
3
.
51