Assembly - Bosch Rexroth DBA 2X E Series Operating Instructions Manual

Procedure after the
expiration of the maximum
storage time of 12 months
After expiry of the maximum storage time, we recommend having the safety valve
checked by your competent Rexroth service. In case of questions regarding spare
parts, please contact the Rexroth service responsible for your safety valve, see
chapter 14.2 "List of addresses".

7 Assembly

High pressure!
Risk of injury due to parts shooting out during works at hydraulic accumulators
which have not been unloaded.
Carry out any work at the safety valve only after the system has been
f
depressurized.
Unload accumulators which may have been mounted at the system.
f
Check the system with test pressure according to ISO 4413.
f
Assembly and commissioning may only be carried out by specialists.
f
Leaking hydraulic fluid!
Slip hazard!
Do not remove the protective covers until assembly.
f
Immediately remove leaking oil.
f
Insufficient assembly space!
Danger of jamming and bruising! Danger of component damage! Insufficient
installation space may lead to jamming or abrasions in case of actuation or
adjustment works at the safety valve. Components cannot be properly mounted or
might be damaged.
Make sure that the assembly space is sufficient.
f
CAUTION
RE25891-B/10.21, DBA...2X/...E Bosch Rexroth AG
Assembly 21/52