McIntosh MA6500 Owner's Manual page 19

P a c kin g In stru ctio n s
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the four plastic feet are at-
tached to the bottom of the equipment. Three #10 x 2-1/4
inch screws and washers must be used to fasten the unit
securely to the bottom pad and wood skid. This will ensure
the proper equipment location on the bottom pad. Failure to
do this will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please call
or write Customer Service Department of McIntosh Labo-
ratory. Please see the Part List for the correct part numbers.
Quantity Part Number
1 033888
2 033887
1 033697
1 033725
1 034008
2 017218
1 033699
2 101204
2 104033
4 017218
4 100159
4 104083
1 048572
P a c kin g In stru ctio n s
Description
Shipping carton only
End cap (Foam pad)
Inside carton only
Top Pad
Bottom pad
Plastic foot (spacer)
Wood skid
#10 x 2-1/4 inch Wood screw
#10 x 1-3/4 inch Flat washer
Plastic foot
#10-32 x 3/4 inch Machine
screw
#10 x 7/16 inch Flat washer
Sipping Carton Complete
19