Checking And Changing Programmed Tracks; Searching For And Storing The Radio Stations - Samsung MM-L7 Instruction Manual

Checking and Changing Programmed Tracks

You can check and change your selection of tracks at any time.
GB
You must have selected at least one track.
1
Press STOP ( ) once if you have started listening to the
selection.
2
Press Program/Set.
Each time you press Program/Set, the next selection
is displayed.
3
Press Program/Set one or more times until the track to be
changed is displayed.
4
Press SKIP I
5
Press CD (ˆ ¨) to start listening to the selection.
Result: The first track selected is played.
You can change one or more tracks in your initial selection.
On/Standby
Power
Sound
Mono/ST.
4
Band
12
or I to select the new track.
Sleep Mute
Preset Timer Timer/
EQ on/off Clock
Tape Program/
Repeat
Mode Set
2 3
CD/TAPE/MP3
4
1 5
Function
VOL.
Tuning
Mode
VOL.

Searching for and Storing the Radio Stations

You can store up to:
15 FM stations
8 MW stations
7 LW stations
1
Switch the system on by pressing On/Standby.
2
Select the TUNER function by pressing FUNC. button.
3
Select the required frequency band by pressing Band button.
Result: The appropriate indication is displayed:
FM
AM(MW)
LW
4
To search for a Press Tuning Mode button
station... on the front panel....
Manually One or more times until MANUAL is displayed.
Automatically One or more times until AUTO is displayed.
5
Select the station to be stored by:
õ
Pressing Tuning or
or
õ
Pressing Tuning or
To scroll through the frequencies faster when searching
manually, hold down the Tuning
The automatic search procedure may stop on a frequency
that does not correspond to a radio station. If this happens,
use the manual search mode.
1
Volume
5
R
CD/TAPE/TUNING
Tuning Mode
CD Repeat
3
Band Band Preset EQ
PROG./Set CD Synchro
Frequency Modulation
Medium Wave
Long Wave
ö
on the front panel
ö
on the remote control
õ ö
or buttons.
2
FUNC.
5
Display
Repeat A B
4
PTY
+10 (CD)
Record
Start/Stop