Checking Or Changing Programmed Tracks; Searching For And Storing The Radio Stations - Samsung MM-B100 Instruction Manual

Digital micro component system cd-r/cd-rw playback
Table of Contents

Advertisement

Checking or Changing Programmed
Tracks
GB
You can check or change your selection of tracks at any time.
1
Press
once if you have started listening to the selection.
2
Press Program/Set.
Result: The following indications are displayed:
(01 = Program no., – – = Check no. on the disc)
If you have already programmed 24 tracks, Check is displayed
instead of PR when you press Program/Set.
3
Press Program/Set one or more times until the track to be changed
is displayed.
4
Press
and
5
Press Program/Set to confirm your change.
6
Press CD (
) to start listening to the selection.
Result: The first track selected is played.
CD SYNC.
2,3,5
Repeat
Program/
Mono/ST
14
to select a different track.
Function
Demo
VOL.+
1
Mode
VOL.–
S.Bass
4
4
TAPE
RDS
REV.
Display
Mode
PTY
CD
1
+10
6
Band
VOL.
Set
4
4
Tuning
Mode
VOL.
Mute
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
8 MW stations
7 LW stations
1
Switch the system on by pressing
2
Select the TUNER function by pressing Function.
3
Select the required frequency band by pressing Band on the remote control.
Result: The appropriate indication is displayed:
FM
AM(MW)
LW
4
To search for a
Press Tuning Mode
station...
One or more times until MANUAL is displayed.
Manually
Automatically
One or more times until AUTO is displayed.
PRESET function is explained in detail in the section
"Listening to the Preset Stations" on Page 15.
5
Select the station to be stored by:
Pressing
or
on the front panel
or
Pressing
or
on the remote control.
To scroll through the frequencies faster when searching
manually, hold down the
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
6
Adjust the volume by:
Turning the VOL. + or – buttons on the front panel
or
Pressing the VOL. + or – buttons on the remote control
7
Select the stereo or mono mode by pressing Mono/ST.
2
Function
4
5
Repeat
6
Program/
Set
5
7
Mono/ST
.
Frequency Modulation
Medium Wave
Long Wave
or
buttons.
Demo
VOL.+
6
Mode
VOL.–
6
S.Bass
5
+10
3
Band
VOL.
VOL.
4
5
Tuning
Tunning
Mode
Mode
VOL.
VOL.
6
Mute

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents