Strymon TIMELINE User Manual page 23

All manuals and user guides at all-guides.com
TimeLine
- User Manual
Delay Machines: Trem Continued
HIGH PASS: Reduces the low frequency content of the wet signal
after the delay. A useful additional tone sculptor for
delays on low-note riffs or chords where you want to
reduce booming in your rig.
OFF
20Hz
120Hz
40Hz 140Hz
60Hz 160Hz
80Hz 180Hz
100Hz 200Hz
TIPS & TRICKS:
The SAW mode at higher LFO SPEED (3:1, 4:1, etc)
will create a high-impact 'plectrum' effect. RAMP mode at lower lfo
SPEED can create an interesting reverse envelope. Try SQUARE and
SINE at higher LFO SPEED for a traditionally-inspired new sound.
Experiment with the MIX control in conjunction with the DEPTH
parameter to dial in the intensity.
230Hz 500Hz
260Hz 600Hz
300Hz 700Hz
350Hz 800Hz
400Hz 900Hz
®
pg 23