Strymon TIMELINE User Manual page 16

All manuals and user guides at all-guides.com
TimeLine
- User Manual
Delay Machines: Reverse
An improvement on the classic reverse delay. The input signal triggers
the delay so the reverse signal is always predictable, musical and
repeatable.
PARAMETERS:
SMEAR: Softens the attack of the repeats while maintaining
full frequency response. This allows for higher mix
levels while keeping the delay out of the way of the dry
signal. With high Repeats levels, the delayed signal
OFF
gets dreamy and ethereal.
|||||||||
HIGH PASS:
Reduces the low frequency content of the wet signal
after the delay. A useful additional tone sculptor for
delays on low-note riffs or chords where you want to
reduce booming in your rig.
OFF
20Hz
120Hz
40Hz 140Hz
60Hz 160Hz
80Hz 180Hz
100Hz 200Hz
TIPS & TRICKS:
Try setting the TIME knob to around 500mS, and
hold a ringing chord for an interesting rhythmic effect. Experiment
with the FILTER, GRIT and MOD knobs.
To keep your dry signal feeding into the reverse delay while
effectively bypassed, assign an expression to control the MIX knob.
Assign the HEEL position to the MIX knob at minimum. Assign
the TOE position to the desired wet mix on the MIX knob. Rock the
expression pedal all the way back to bypass the delay. Rock the
pedal to the TOE position to hear reverse repeats that have already
been generating while the mix was at full dry.
REVERSE
PATTERN
DUAL
DIGITAL
dBUCKET
dTAPE
TYPE
BANK / TIME
hold (save)
A
REC / DUB
230Hz 500Hz
260Hz 600Hz
300Hz 700Hz
350Hz 800Hz
400Hz 900Hz
®
VALUE
push (param)
ICE
hold (global)
DUCK
SWELL
TREM
FILTER
LO-FI
BANK DOWN
pg 16
FILTER
®
B
PLAY