Strymon TIMELINE User Manual page 10

All manuals and user guides at all-guides.com
TimeLine
- User Manual
Delay Machines: Common Parameters Continued
NAME: Allows editing the 16 character name of the current
preset. Use the VALUE encoder to change the selected
character. Use the TYPE encoder to select a character.
Exit by pressing the VALUE encoder, then press and
hold the TYPE encoder to SAVE the name permanently.
NOTE:
global must be set to ON or SCROLL.
EXPRESSION PEDAL ON/OFF:
pedal input for each preset.
EXPRESSION PEDAL SET:
preset. All knobs can be configured to be used with the
expression pedal. To set up which knobs are controlled
by the expression pedal, push the Value encoder
when it displays "EP SET" and it will then display
"HEEL". Turn the knob(s) to the position desired at heel
down on the expression pedal. Then, turn the Value
encoder right to display"TOE" and set the knobs to
their desired values at the toe down position on the
expression pedal. An expression pedal can control all
of the knobs simultaneously.
TAP MODE: Adjusts how the last tapped tempo affects preset
changes. Set to PRESET so the delay time will change
to the saved value in the preset. Set to GLOBAL so
the delay time will remain at the last tapped tempo
regardless of what tempo is saved in the preset.
MIDI CLOCK ON/OFF:
to external MIDI clock from the MIDI input. This
parameter is saved independently so that only presets
with this parameter set to ON will respond to MIDI
clock.
For the preset name to be displayed the NAMES
Enables or disables the expression
Enters the expression pedal setup for each
When set to ON, TimeLine will respond
®
pg 10