Page 2
Instruction Manual Thanks for choosing BOYA! The BY-MM1+ is an upgraded super-cardioid condenser microphone that delivers lower noise and higher sensitivity sound on your smartphones, tablets, DSLRs, consumer camcorder, PCs and more. Due to its plug and play operation and no battery required design, the BY-MM1+ is a perfect audio solution for mobile journalists, vloggers and video hobbyists.
Features • Compatible with smartphones, tablets, DSLRs, consumer camcorder,PCs and more • Super-cardioid condenser shotgun microphone • Improved sensitivity and signal to noise ratio • Plug and play operation • Durable metal construction • 3.5mm headphone output • Rycote Lyre shock mount and furry windshield included ®...
Page 5
1. Furry windscreen 2. BY-MM1+ microphone 3. Audio output jack 4. 3.5mm headphone output 5. Rycote Lyre shock mount ® ® 6. 3.5mm TRRS to TRS output cable 7. 3.5mm TRRS to TRRS output cable What’s difference? 1) 3.5mm TRRS to TRS output cable - For cameras, camcorders , audio recorders and other audio/video recording devices with audio monitoring jack.
Page 6
- Please read these instructions for use thoroughly before you use this new equipment for the first time. It contains everything you need to know in order to avoid damage to persons or property. - Strictly follow all notes on safety in these instructions for use. - Keep these instructions for use in a safe place.
Page 7
Attach the microphone to smartphone or tablet. 1. Connect 3.5mm TRRS to TRRS output cable into your smartphone, tablet. 2. Open the audio or video recording app and start recording. 3. When finishing, plug the 3.5mm headphone output and playback the previous audio you recorded. NOTE: If you need to monitor the audio in playback mode, please make sure that you have turned on monitoring function on...
Page 8
Attach the microphone to cameras, camcorders, audio recorders and other audio or video recording devices. 1. Turn counter-clockwise to loosen the screw. 2. Slide the microphone onto the camera’s hot shoe. 3. Turn clockwise to tighten the screw to stabilize on the shoe mount.
Page 9
1. Plug the 3.5 mm TRS connector into the audio output jack of your device.
Trouble shooting If you have any problem using the BY-MM1+ components, use the following checklist. If any problem persist, please consult our local dealer, or contact us directly at sales@boya-mic.com. Problem Solution Make sure that using the correct audio connector.
Page 16
SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD. The BOYA logo is a trademark which is registered and owned by Shenzhen Jiayz Photo Industrial., Ltd. COPY RIGHT 2010-2020 深圳市长丰影像器材有限公司 地址:广东省深圳市龙华区观澜街道大富社区硅谷动力智能终端产业园A16栋 TEL: 400 6131096 Email: sales@boya-mic.com www.boya-mic.com / www.jiayz.com...
Need help?
Do you have a question about the BY-MM1+ and is the answer not in the manual?
Questions and answers