Advertisement
Available languages
Available languages
Ambient temperature
Operation of the battery
5 °C-40 °C / 41 °F-104 °F
Charging of the battery
5 °C-40 °C / 41 °F-104 °F
LED indicator
4 LED lights are on
3 LED lights are on
2 LED lights are on
1 LED light is on
1 LED light flashes
To charge the battery
CAUTION:
Connect the battery charger
to a power outlet with the voltage and
frequency that is specified on the rating
plate.
1. Connect the power cord to the battery charger.
2. Connect the battery charger to a grounded power
outlet. The charging LED flashes one time. (Fig. 30)
(Fig. 31)
3. Connect the battery to the battery charger. The
charging LED comes on. Charge the battery for
maximum 24 hours. (Fig. 32) (Fig. 33)
4. Push the battery indictaor button. The battery is fully
charged when all the LED indicators come on.
5. Pull the power plug to disconnect thr battery charger
from the power outlet. Do not pull the power cord.
6. Remove the battery from the battery charger.
To do before you start the product
1. Examine the work area. Remove objects that can be
thrown out.
2. Examine the cutting attachment. Make sure that the
blades are sharp, and have no cracks and damages.
3. Make sure that the product works correctly. Examine
that all nuts and screws are tight.
4. Make sure that the handle and safety devices are
not damaged and are attached correctly. Do not
operate a product with missing parts or is changed
from its initial specification. Use protective gloves
when it is necessary.
5. Make sure that the covers are not damaged and are
attached correctly, before you operate the product.
1980 - 001 - 23.12.2022
Battery status
The display shows the state of charge and if there are
problems with the battery.
(Fig. 29)
Battery status (state of charge)
BLi10
N/A
The battery is 76% - 100% charged.
The battery is 51% - 75% charged.
The battery is 26% - 50% charged.
The battery is 0% - 25% charged.
To start the product
1. Push the start/stop button until the green LED comes
on. (Fig. 34)
2. Push the front handle trigger on the front handle.
(Fig. 35)
3. Push the power trigger. (Fig. 25)
To operate the product
1. Start near the ground and move the product up
along the hedge when you cut the sides. Make sure
that the body of the product does not touch the
hedge. (Fig. 36)
2. Hold the product near your body for a stable work
position.
3. Be careful and operate the product slowly.
To use the SavE function
This product has a power saving function, SavE.
Note:
cutting power of the product.
1. Push the SavE button on the keypad.
2. Make sure that the green LED comes on.
3. Push the SavE button again to disconnect the
function. The green LED goes off. (Fig. 37)
Automatic shutdown function
The product has a shutdown function that stops the
product if the product is not used. The green LED for
start/stop indication goes off and the product stops after
180 seconds.
40-B70
The battery is 76% - 100% charg-
ed.
The battery is 51% - 75% charged.
The battery is 26% - 50% charged.
The battery is 6% - 25% charged.
The battery is 0% - 5% charged.
WARNING:
Make sure that the
front of the cutting equipment does not
touch the ground.
The SavE function does not decrease the
11
Advertisement
