Table of Contents
Advertisement
1.7.2.
Keyboard power (3-pin KBPWR)
This jumper allows you to set the keyboard wake-up feature. Set this jumper to pin
1-2 (+5VSB) to wake up the computer under power status (ACPI) S1, S3, S4 and
S5 when you press a key on the PS/2 keyboard or mouse. Set this jumper to pin 2-
3 (+5V) to wake up the computer under power status (ACPI) S1 only. This feature
requires an ATX power supply that can supply at least 1A on the +5VSB lead, and
a corresponding setting in the BIOS.
P5LD2-VM/CR Keyboard power setting
1.7.3
Power fan mode selector (3-pin FANPWR1)
This jumper allows you to set a 4-pin Intel™ power fan to either PWM mode or DC
mode. This feature does not support ordinary 3-pin power fans.
P5LD2-VM/CR FAN power setting
1-22
KBPWR
3
2
2
1
+5VSB
+5V
(Default)
FANPWR1
1 2
2 3
PWM
DC mode
(Default)
Chapter 1: Product introduction
Advertisement
Table of Contents
