Download Print this page

Omron Y-506W Instruction Manual page 8

Hide thumbs Also See for Y-506W:

Advertisement

II. Clean/ Replace the Primary filter: - Please follow the below steps.
Remove the primary filtration panel
from the back of machine by pull it
Note: - Please clean the primary filter in every 15 days for better performance.
III.
Replace the secondary Filter: - Please check if machine complete 3000 Hours of working or filter is dark
black, please contact to customer care for spare secondary filter. To replace please follow the below steps: -
Unscrew the
secondary filter
case with help of
screwdriver and
open the case
Note: - Working hours are displayed when machine
is turned On.
Do not change any filter when machine is turned
On.
Remove the filter, use light detergent
firstly, rinse with clean water, and
then install it after it is completely dry
Pull the filter in
upward direction
and remove it.
In case filter turned
black or device
completed 3000
hours of working
please replace the
same.

Advertisement

loading