Vcr Operation; Tape Controls - Samsung VR5460 Owner's Manual

VCR Setup
Tape length
1 Press the MENU button on the remote control.
Press the M button to select VCR Function Setup,
then press the ❿ button.
2 Press the ❿ button to select the video cassette length.
This information is usually printed on the tape box.
The menu cycles through: T120, T160 or T180.
Once the type of cassette is set, the VCR can display
the amount of time remaining on the tape when you
press the DISPLAY button.
3 Press the MENU button to make the MENU screen
disappear after setting up.
Auto play
Access the "VCR FUNCTION SETUP" menu as
described above. Press the M button to set the cursor to
"Auto play", then press the ❿ button to set ON or OFF.
When "Auto play" is ON, the VCR will automatically begin
playing a video tape when it is inserted, as long as the
safety tab of the cassette has been removed
(see page 10).
Press the MENU button on the remote control to make
the MENU screen disappear after setting up.
Auto repeat
Access the "VCR FUNCTION SETUP" menu.
Press the M and ❿ buttons to set "Auto repeat" ON or
OFF. In the VCR FUNCTION SETUP "Auto repeat" sets
the VCR to play a tape repeatedly [unless a tape control
is activated (stop, fast forward or rewind)] .
Press the MENU button on the remote control to make
the MENU screen disappear after setting up.
Auto power off
Access the "VCR FUNCTION SETUP" menu.
Press the M and ❿ buttons to set "Auto power off" to
1Hr or 2Hr. "Auto power off " sets the VCR to turn off
automatically.
Note: VCR will shut off 1 or 2 hours after the last button is pressed.
12

Tape Controls

VCR FUNCTION SETUP
Record speed: [SP]
Audio output: [MAIN]
❿ Tape length: [T120]
Auto play: [ON]
Auto repeat: [OFF]
Auto power off: [OFF]
[ /❿] [MENU/EXIT]
❷
VCR FUNCTION SETUP
Record speed: [SP]
Audio output: [MAIN]
Tape length: [T120]
❿
Auto play: [ON]
Auto repeat: [OFF]
Auto power off: [OFF]
[ /❿] [MENU/EXIT]
❷
F.ADV/SKIP
VCR FUNCTION SETUP
Record speed: [SP]
Audio output: [MAIN]
Tape length: [T120]
Auto play: [ON]
❿
Auto repeat: [OFF]
Auto power off: [OFF]
[ /❿] [MENU/EXIT]
❷
VCR FUNCTION SETUP
Record speed: [SP]
Audio output: [MAIN]
Tape length: [T120]
Auto play: [ON]
Auto repeat: [OFF]
❿
Auto power off: [OFF]
[ /❿] [MENU/EXIT]
❷

VCR Operation

Play and Pause/Still
• Press the PLAY button on the remote control or on the front of the VCR to play a video.
(If Auto play is selected and the video tape has no safety tab, it will begin playing automatically
when you insert it in the VCR.)
• In play or slow motion mode, press the STILL button to stop the tape on a single still frame.
Press the button again to resume normal viewing.
Fast Forward and Forward Search
• Press the FF button to fast forward the cassette at top speed in stop mode.
• Press the FF button once while a tape is playing for forward search. Press the PLAY button to
stop search.
• Press and hold to increase speed by 7 times for tapes recorded at SP speed and 21 times for
tapes recorded at SLP speed. Release button to play.
Rewind and Reverse Search
• Press the REW button to rewind the cassette at top speed in stop mode.
• Press the REW button once while a tape is playing for rewind search. Press the PLAY button
to stop search.
• Press and hold button while tape is playing to increase reverse speed by 7 times for tapes
recorded at SP speed and 21 times for tapes recorded at SLP speed. Release button to play.
Frame Advance and Skip Search
• Press the F.ADV/SKIP button repeatedly to advance a video tape frame by frame in still mode.
0
Press the PLAY button to resume normal viewing.
• For Skip Search, press the F.ADV/SKIP button once to skip ahead 30 seconds in play mode.
Press the F.ADV/SKIP button twice to skip ahead 60 seconds, three times to skip ahead 90
seconds and four times to skip ahead 120 seconds.
Slow Motion
SLOW
• Press the SLOW + or - buttons while a cassette is playing for slow motion.
• Press the SLOW buttons repeatedly to vary slow motion speed from 1/5 to1/30
of normal playback. Press the PLAY button twice to resume normal viewing.
Replay
REPLAY
100
• Press the REPLAY button when a video is playing at normal speed or in slow motion, and the
VCR will rewind for about five seconds of material in SP mode or about fifteen seconds in SLP
mode, then play back the section again.
Shuttle Buttons
SHUTTLE
• Shuttle buttons on the remote control offer one-touch search speed playback.
• Press 6 to advance or 4 to reverse playback in play mode. Playback speed is determined by
how many times you press the shuttle button.
13