Conversion Recording - Samsung SV-7000W Owner's Instructions Manual

Conversion Recording

You can convert the signal recorded on a tape to another format on
a second tape.
LINE 1 IN
1
Connect the RCA Audio/Video cable to the input on the front of the
Samsung VCR (SV-7000W)
2
VIDEO L AUDIO R Insert the tape to record.
3 Connect the other end of the RCA Audio/Video cable to the output
connectors of another VCR (see page 39).
4 If you wish to convert from a tape recorded on NTSC to a PAL
recorded tape, insert the NTSC tape into the other VCR.
AUDIO OUT (R)
5 Press the INPUT button on the remote control to select the L1
AUDIO OUT (L)
input.
Result:
VIDEO OUT
6
Press the PAL output system button on the front panel to select
the PAL system.
Result:
7 Press the PLAY button of the other VCR.
8
Press the REC button of the Samsung VCR for at least one
STROBE AUDIO
2
3 second.
Result:
5
ART INPUT
5 6
CH
Follow these steps to perform conversion recording to other
9
8
formats.
6
42
The display panel shows L1.
The display panel shows PAL.
appears on the display panel, and recording begins.