Recording A Program With Automatic Stop; Using The Timer Programming Feature - Samsung SV-7000W Owner's Instructions Manual

Worldwide video cassette recorder
Hide thumbs Also See for SV-7000W:
Table of Contents

Advertisement

Recording a Program with Automatic Stop

This function enables you to record up to nine hours of programs.
Your VCR stops automatically after the preset length of time.
1
Switch on the television.
POWER
EJECT
NORMAL(VHS)
SQPB ONLY
TRACKING
SPEED
AUDIO OUT
2
Select the AV input on the television for use with your VCR.
LINE 1 IN
RESET
CHANNEL
VIDEO
L
AUDIO
R
REC
3
Insert the cassette on which the program is to be recorded.
PLAY
PAUSE/STILL
REW
F.F
STOP
Result:
4
Select:
INDEX
REC.SPEED CLK/COUNT
PICTURE
TIMER
the station to be recorded using the CH (
or
STROBE
AUDIO
1
2
3
5
the AV source using the INPUT button for a satellite tuner or
external video source
ART
INPUT
4
5
6
Result:
4
CH
7
8
9
100
CLR/RST
0
5
Select the recording speed by pressing the REC.SPEED button as
4
many times as required (see page 22).
6
Press the REC button for at least one second to start recording.
Result:
REC
P/ST
STOP
6
7
Press the REC button several times to increase the recording time
DISPLAY
MONITOR
A.DUB
in:
30-minute intervals up to four hours ; or
1-hour intervals up to nine hours.
Result:
INPUT
OUTPU
+10
INDEX
INDEX
DUB
DUB
Hi-Fi
Hi-F
+5
8
0
If you wish to cancel the recording before the end, press POWER.
-10
-20
-30
If the end of the tape is reached while recording:
-40
L
R
the recording stops ; and
the VCR automatically turns off.
24
The VCR is switched on automatically.
or
) buttons ;
The channel number is displayed and the program can
be seen on the television.
The record indicator appears on the television screen
and VCR display. An index is recorded on the tape
(see page 36).
The length is displayed on the VCR and television
displays. The selected program is recorded for the
length of time requested. At the end of that time, the
VCR stops recording automatically.

Using the Timer Programming Feature

The Timer Programming feature enables you to preset the VCR to
record a program up to one month before it is to be broadcast. Up
to six programs can be preset.
Before presetting a recording, check that the date and
time are correct. If not, refer to page 17. If the clock has
not been set, the Date/Time Setting function is activated
automatically.
1
Insert the cassette and press the TIMER button.
Result:
The Timer selection is displayed.
2
Press
to select the standard timer.
3
Select the required channel by pressing the
or
INPUT to select the SC, AV, L l or L2 input sources.
4
Press
to select the recording day.
5
Select the required day by pressing the
or
buttons.
DLY (daily program).
W-SU, W-MO, .... , W-SA(weekly program).
6
Press
to select the recording start time.
7
Select the required hour value by pressing the
or
8
Press
to select the minutes.
9
Select the required minute value by pressing the
10
Press
to select the recording stop time.
11
Select the required recording stop time by pressing the
buttons, following the same procedure as when selecting the
recording start time.
12
Press
to select the REC SYSTEM.
13
Select the required recording system value by pressing the
or
buttons. Offset value is THROUGH.
14
Press
to select the recording speed.
15
Select the required recording speed value by pressing the
or
buttons. Offset value is SP.
Result:
If you select AUTO mode, the VCR compares the
timer duration with the remaining time on the cassette.
If the tape is not long enough, the speed automatically
changes from SP to LP/SLP.
16
When you have finished, press the MENU button.
Result:
SET is displayed, indicating that the VCR has been
programmed.
17
Press the VCR POWER button to activate the timer.
X
REC.SPEED CLK/COUNT
PICTURE
TIMER
STROBE
AUDIO
1
2
3
ART
INPUT
6
5
buttons or
STANDARD TIMER
VCR PLUS
# ❷
EXIT:(TIMER)
buttons.
CLOCK: 1/JAN FRI 12:32
CH
DAY START STOP
--- ---- --:-- --:--
❿❿
--- ---- --:-- --:--
❿❿
❿❿
--- ---- --:-- --:--
or
buttons.
❿❿
--- ---- --:-- --:--
--- ---- --:-- --:--
❿❿
--- ---- --:-- --:--
❿❿
SET:
# ❷
DELETE:(CLR/RST)
(MENU)
or
INPUT
OUTPUT
SYSTEM
SYSTEM
OK
4
AUTO
MENU
VCR
POWER
17
INDEX
REC.SPEED CLK/COUNT
PICTURE
STROBE
1
2
3
25
GB

Advertisement

Table of Contents
loading

Table of Contents