Supermicro AOM-TPM-9670V User Manual page 14

B. Provisioning Intel TXT (Server)
Next, you will need to provision Intel TXT in the UEFI shell.
Note: If the TPM part number is AOM-TPM-9670V-S or AOM-TPM-9670H-
S, you do not need to get the Intel
and enable the Intel TXT feature in the BIOS.
1. Select "UEFI: Built-in EFI Shell" in the BIOS. The system will boot into the
Unified Extensible Firmware Interface (UEFI) with a list of available USB
devices.
2. Each USB device has its own code. Type the code for the USB device that
you want to use into the command line at the bottom of the screen. and press
the <Enter> key.
Note: The device used for the purposes of this user guide had a code
of fs0. Replace this code with the code that corresponds to your device.
3. In the command line at the bottom of the screen, follow these steps below
after typing "FS0".
Chapter 2: Deploying and Using the TPM
Provisioning Tool. Please go ahead
®
2-5